CAR LOADING & TIE DOWN SYSTEM
Rail Ryder is a custom car loading & securement system that easily loads your car into an enclosed trailer. It’s perfect for exotic, classic & supercars that have low profiles and can’t afford to get damaged.
Check out the detailed features below!
Over-the-wheel straps are held in place with strap tension and have 20” of left-to-right adjustment for any tread width. Included are rubber tire blocks to keep the wheel straps from migrating off the tire. All straps are 2” wide with 10,000 lb rating, exclusively from Mac’s Custom Tie Downs.
Gate extension components are hinged and store on the inside of the trailer tailgate. Ramps are stored in vertical drop-in pockets at the rear of the trailer.
Four fixed position lashing winches with 2” straps are used to hold the trolleys against rubber bump stops during transport. The lashing winches are mounted directly to the trailer chassis for maximum strength and security.
Trolleys are independent of each other and self-adjust to any wheel base.
Exclusive Superwinch is quiet and reliable and uses memory-free synthetic rope. The wireless remote leaves you untethered during loading and unloading.
Lowest loading angle in the industry, at only 4 degrees. Ramps quickly lock in place with a mechanical interlock and cannot become dislodged during the loading sequence.
A triangular bridle attaches the winch rope to the front trolley so that no hardware comes in contact with your chassis.
Trolleys roll easily on glass-filled nylon v-groove wheels with maintenance-free sealed bearings.